Desire to extend your home network setup outside your home? Need proper coverage in your garden or lawn area? If so then you can use Wavlink AC1200 device in repeater mode to extend the network. Wavlink ac1200 setup in repeater mode is not hard at all. Yes it actually seems challenging but you can perform it very conveniently by following a few steps. A step by step guide to configure the device in your home network setup to extend it outdoors is specified further. You have to go with the instructions mentioned and enjoy high speed internet in every corner of your space even outdoors.

Placement Of The Device

The procedure of Wavlink AC1200 setup starts with the placement of the device closer to the router device for the initial setup. Once the configuration is done properly you can relocate the device to an area which is outside but within the range of the router to boost the performance. While deciding the placement for your device make sure to keep it away from radio frequency devices and heavy metal objects. Also avoid the placement closer to the thick walls and in corners.

Power Of The Device

To turn on the device you have to use the adapter you have received along with the device to initiate the procedure ahead. Connect the pin of the adaptor to the power port of the device. Afterward you have to connect it to the power outlet and turn on the power supply to start the device. Wait till the device LED turns solid and stable to jump to the next step of the process.

Select Client Device And Connect It

Now you have to choose a computer or a laptop or a smartphone device in which you are going to access the admin panel. After selecting your device you have to connect it with the Wavlink AC1200 network. To connect you have two methods out of which you can follow anyone. The first method is the wired method in which you have to use an ethernet cable to connect both the devices. The second method is the wireless method in which you have to use wireless network details of the device to access it with the client device.

Access Admin Panel

Moving ahead in the Wavlink AC1200 setup procedure you have to access the admin panel using a web browser. In the URL bar of the browser you have to specify a web address or IP address to reach the page. Once the page appears on the screen you need to mention the default login details and then click on the login button to gain access to the admin panel.

Configure Settings

Now you have to start configuring your device, choose repeater mode when the screen asks you to select the modes in which you are going to configure the device. Afterwards you have to configure the internet settings, wireless network settings, security settings and other advanced changes as per your requirement. When all the changes have been completed you have to reverify the details and then submit them. The device may reboot itself to apply the changes if not then you have to manually do it.

Test Network

Once the boot up is complete you need to perform a network test to check the speed and coverage of the device network. Relocate your device to a better location and take a smartphone device to test the network. Connect your smartphone with the new network and then play an online video. Move around your space to verify the coverage and speed from different locations outside your home.

Conclusion

Wavlink AC1200 setup procedure breakdown above is very simple and easy to follow. Even a person who is new to networking can understand the process and configure the device by themselves. Once you configure the device and add it to your home network setup you will be able to enjoy high speed internet in every corner of your home even outside your home. With the help of this networking device you can enjoy high speed internet in the garden, lawn, or balcony area without any difficulty. If you get stuck while performing the setup then you can communicate with experts also to detect the issue and apply proper troubleshooting. An expert inside always matters when you are performing configuration of a networking device.